Metals Webinar | Metal Fatigue
Welcome from the Chair
1st Metals Webinar
Metal Fatigue
Metal fatigue has been studied since the early 1800s. Because of its complexity, the field attracted significant attention as a research topic since then. Historically, metal fatigue studies have been the domain of experimentalists using traditional methods and empirical curve fitting models. Recently, there has been significant progress in this field, because of new developments in theoretical mechanics, theory of thermodynamics, innovative experimental techniques and new design methods. This online webinar will be hosting three of the most prominent scientists in the world studying this challenging topic.
Date: 19 January 2022
Time: 11:00am CET | 5:00am EST | 6:00pm CST Asia
Webinar ID: 834 8316 7895
Webinar Secretariat: metals.webinar@mdpi.com
Chair
Department of Civil, Structural and Environmental Engineering, University at Buffalo, The State University of New York, U.S.A.
Dr. Cemal Basaran is a Professor in the Dept. of Civil, Structural and Environmental Engineering at University at Buffalo, The State University of New York. He specializes in computational and experimental mechanics of electronic materials. He has authored 150 + peer reviewed journal publications, a textbook on the Unified Mechanics Theory, (2021, ©Springer-Nature, ISBN-13: 978-3030577711) and several book chapters. His research focuses mainly on the development of the Unified Mechanics Theory, which is the unification of laws of Newton and the laws of thermodynamics at ab-initio level, and Nano mechanics of 2-D electronic materials. Some of his awards include 1997 US Navy ONR Young Investigator Award, and 2011 ASME EPPD, Excellence in Mechanics Award. He is a Fellow of the ASME. He has been the primary dissertation advisor to 24 PhD students. His research has been funded by NSF, US Navy ONR, Department of Defense, State of New York, and many industrial sponsors including but not limited to Intel, Motorola, Northrop Grumman, Raytheon, Delphi, DuPont, Texas Instruments, Micron, Tyco Electronics, Analog Devices and many others. He serves as research proposal reviewer to many national and international research funding agencies around the globe including but not limited to UK, EU, France, China, Hong Kong, Saudi Arabia, Germany, Ireland, Austria, Kazakhistan and many others.
Invited Speakers
Department of Mechanical Engineering and Production, Norwegian University of Science and Technology, Norway
Filippo Berto is international chair in fracture mechanics, fatigue, and structural integrity at the Norwegian University of Science and Technology of Trondheim, Norway, since beginning of 2016. He was professor of machine design at the University of Padua, Italy, between 2006 and 2015. He is chairman of the technical committee ESIS TC15 on Structural Integrity of additive manufactured components of European Structural Integrity Society. Filippo Berto received several awards and distinctions for his research activity.
Professor Stefano Beretta got his PhD at Kyushu University in 1997 (Supervisor Prof. Y. Murakami) and since then he has been making his career at the Politecnico di Milano, where he became Full Professor in 2002. S. Beretta is a member of the Editorial Board of Eng. Fract. Mechanics and Metals. He has a long record of services for ESIS (European Structural Integrity Society): member of ESIS Exco from 2002 to 2010 as Newsletter Editor and webmaster, then Vice-President from 2010 to 2014. He is Chairman of TC24 since 2010, where he organized and hosted many international meetings (http://esistc24.mecc.polimi.it). He was Chairman and organizer of the 3rd Int. Symposium Fatigue Design and Material, held in Lecco, September 2017 and Co-Chair of ASTM Symposium on Structural Integrity of AM Parts (November 2018) in Washington D.C. in 2019 he was conferred the ASTM Award of Excellence in Additive Manufacturing Research. His main research interests are: fatigue and damage tolerance assessment of railway components together with planning of maintenance and inspections; development of probabilistic methods for defect analysis and assessment under LCF and HCF; the application of DIC to the analysis of fatigue damage and crack closure; ii) the fatigue of AM materials and metamaterials. He leads the METAMAT-Lab at Politecnico di Milano.
Department of Applied Mechanics, Indian Institute of Technology (IIT) Madras, India
C Lakshmana Rao is a Professor in the Department of Applied Mechanics at the Indian Institute of Technology (IIT), Madras. He obtained his B. Tech in 1982, and MS in 1986 from IIT Madras. He obtained Sc.D. from the Massachusetts Institute of Technology in 1992 and his B.Tech and MS degrees from IIT Madras. He teaches courses on continuum mechanics, numerical modelling, fracture mechanics, impact mechanics, mechanics of materials, advanced computational methods like FEA and mesh-free methods. His research interests include experiments on high strain rate impact events, modelling of failure of brittle materials, buckling control using smart materials, ballistic impact mechanics, structural response in blasts, mechanics in ayurvedic procedures, sports mechanics, physics-based modelling of rate-dependent material behaviour, constitutive modelling of fibre composites, granular and clayey materials, fatigue characterization of metals, interface-fracture mechanics, electro-mechanical characterization of smart materials like PVDF and conducting polymers, and study of mechanics of seal failure. He also actively participates in projects that involve dissemination of technical knowhow and expertise to villages living in rural communities in India. His interests include learning Sanskrit and study of classic texts in Sanskrit.
Webinar Content
Program
|
Speaker/Presentation |
Time in CET |
|
Prof. Dr. Cemal Basaran Chair Introduction |
11:00 – 11:05 am |
|
Prof. Dr. Filippo Berto Local Approaches for Fatigue Design |
11:05 – 11:35 am |
|
Prof. Dr. Stefano Beretta Fatigue of AM Materials: The Role of Defects and Inhomogeneities |
11:35 am – 12:05 pm |
|
Prof. Dr. C. Lakshmana Rao Predicting Fatigue Life Without Curve Fitting: Unified Mechanics Theory |
12:05 – 12:35 pm |
|
Q&A Session |
12:35 – 12:50 pm |
|
Closing of Webinar |
12:50 – 12:55 pm |
Relevant SI
New Trends in Fatigue of Metals
Guest Editors: Prof. Dr. Luis Reis & Dr. Pedro Moreira
Deadline for manuscript submissions: 31 January 2022
Advances and Improvement in Corrosion-Fatigue Resistance of Magnesium Alloy
Guest Editors: Dr. Sugrib Kumar Shaha & Dr. Dyuti Sarker
Deadline for manuscript submissions: 31 January 2022
Metal Fatigue 2021
Guest Editors: Prof. Dr. Joseba Albizuri & Dr. Luis Pallarés-Santasmartas
Deadline for manuscript submissions: 31 January 2022
Fatigue Failure Assessment of Metallic Materials
Guest Editors: Dr. Zbigniew Marciniak, Prof. Dr. Ricardo Branco & Dr. Wojciech Macek
Deadline for manuscript submissions: 28 February 2022
Fatigue Properties of Surface Modified Metallic Materials
Guest Editors: Prof. Dr. Delphine Retraint & Dr. Zhidan Sun
Deadline for manuscript submissions: 28 February 2022
Metal Fatigue: Current State of the Art
Guest Editor: Prof. Dr. Jernej Klemenc
Deadline for manuscript submissions: 28 February 2022
Laser Peening for Improving Fatigue Properties of Aluminium Alloys
Guest Editors: Prof. Dr. Yuji Sano & Dr. Nikolai Kashaev
Deadline for manuscript submissions: 31 March 2022
Characterization and Modelling of Fracture and Fatigue in Metallic Materials
Guest Editors: Dr. Pavel Konopík & Prof. Dr. Jan Džugan
Deadline for manuscript submissions: 31 March 2022
Fatigue Crack Propagation Micromechanisms of Metallic Materials
Guest Editor: Prof. Dr. Francesco Iacoviello
Deadline for manuscript submissions: 31 March 2022
Advances in Fracture, Fatigue and Structural Integrity Analyses of Metals
Guest Editors: Prof. Dr. Sergio Cicero & Dr. Sergio Arrieta
Deadline for manuscript submissions: 31 March 2022
Fatigue Behaviour of Additive Manufactured Metallic Materials
Guest Editors: Prof. Dr. Yves Nadot, Prof. Dr. Jean-Yves Buffière & Prof. Dr. Franck Morel
Deadline for manuscript submissions: 30 April 2022
Fatigue Design of Steel and Composite Structures
Guest Editors: Prof. Dr. Mingliang Zhu
Deadline for manuscript submissions: 30 April 2022
Computational Mechanics of Fatigue and Fracture in Metallic Materials
Guest Editors: Prof. Dr. José César de Sá & Prof. Dr. Abílio M.P. De Jesus
Deadline for manuscript submissions: 31 May 2022
Surface Modification of Metallic Materials for Wear and Fatigue
Guest Editors: Prof. Young-Sik Pyun & Prof. Do-Sik Shim
Deadline for manuscript submissions: 31 May 2022
Fretting Wear and Fatigue Behavior of Metals
Guest Editors: Prof. Dr. Helmi Attia
Deadline for manuscript submissions: 31 May 2022
Fatigue Behavior of Coated Alloys
Guest Editors: Prof. Dr. Miguel Justino Ribeiro Barboza
Deadline for manuscript submissions: 31 May 2022
Fatigue Behavior Analysis of Metals and Alloys
Guest Editors: Prof. Dr. Abílio M.P. De Jesus & Prof. Dr. Filippo Berto
Deadline for manuscript submissions: 30 June 2022
Fatigue Damage Assessment of Steels
Guest Editors: Prof. Dr. Jai-Won Byeon & Dr. Jae-Yeon Kim
Deadline for manuscript submissions: 30 June 2022
Corrosion Fatigue Behavior of Aluminum Alloys
Guest Editors: Dr. Yakun Zhu
Deadline for manuscript submissions: 30 June 2022
Multi-Axial Fatigue and Fracture Behavior in Metals
Guest Editors: Prof. Dr. Manuel Freitas
Deadline for manuscript submissions: 31 July 2022
Fatigue Assessment of Metal Welded Joints
Guest Editors: Prof. Dr. Roberto Tovo & Prof. Dr. Alberto Campagnolo
Deadline for manuscript submissions: 31 October 2022
Deformation and Torsional Fatigue Behaviour of Steels and Uniaxial Stress Tests
Guest Editors: Prof. Dr. Marino Brčić
Deadline for manuscript submissions: 31 October 2022
Fatigue Behavior, Crack Growth and Fatigue Life Assessment of Metallic Materials
Guest Editors: Prof. Dr. Tilmann Beck
Deadline for manuscript submissions: 31 October 2022
Fatigue Testing and Analysis of Metallic Materials
Guest Editors: Prof. Dr. Carlos Antonio Reis Pereira Baptista
Deadline for manuscript submissions: 30 November 2022
Fatigue Behavior of Metals:Theoretical Analysis and Experimental Tests
Guest Editors: Prof. Dr. Guido La Rosa
Deadline for manuscript submissions: 31 December 2022
Fracture Mechanism and Fatigue Behaviour of Metallic Materials
Guest Editors: Prof. Dr. Xin Wang
Deadline for manuscript submissions: 31 December 2022
Sponsors and Partners
Organizers
